Deals of The Day
Ends in:
Microprocessor Based Static ELR
Microprocessor Based Static EL…
Specification
Consistent reliability with accuracy.
Fixed or variable current sensitivity by Dip Switch selection
LED’s for visual indication of fault.
High Barrier connector at rear for easy termination and safety standards.
Tamper proof polycarbonate cover in the front.
Test & Reset Facility for testing healthiness of the relay
SKU: n/a
EARTH RESISTANCE TESTER
METRAVI ERT-1501 Digital Earth…
SPECIFICATIONS
Range : 0Ω to1000Ω
Resolution : 0.01Ω
Accuracy : ±3%
DC Voltage Range : 0 V to 1000 V
AC Voltage Range : 0 V to 750 V
Resistance Range : 0Ω to 200kΩ
Certifications : CAT III 1000V, CE
FEATURES
Data Hold facility
Displays test result and battery voltage on the same screen
LOCK Button for continuous HANDS FREE measurement
Both Earth Resistance and Earth Resistivity can be measured
Can be used in 4 Terminal and 3 Terminal configurations
Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
Earth Resistance Range : 0 – 10/100/1000 Ohms
Complies with CE, CAT-III 1000V
Complete with Testing Kit
Re-Chargeable Battery and Battery Charger can be provided at extra cos
SKU: n/a
EARTH RESISTANCE TESTER
METRAVI ERT-1502 Digital Earth…
SPECIFICATIONS
Range : 0-20/200/2000 Ω
Resolution : 0.01Ω
Accuracy : ± 2%
DC Voltage Range : 0 V to 1000 V
AC Voltage Range : 0 V to 750 V
Resistance Range : 0Ω to 200kΩ
Certifications : CAT III 1000V, CE
FEATURESÂ
Data Hold facility
Displays test result and battery voltage on the same screen
LOCK Button for continuous HANDS FREE measurement
Both Earth Resistance and Earth Resistivity can be measured
Can be used in 4 Terminal and 3 Terminal configurations
4 Digits EXTRA LARGE Backlit Dual LCD Display
SKU: n/a
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONSÂ
Maximum Input Voltage : DC 2000 V
Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
Output Terminal : 4 mm banana terminal
Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
Standards : EN 61010
Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
Enables high voltage measurement up to CAT â…¢ 2000 V
Safely measure solar installations like the mega-solar without interrupting the grid
Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
CM4141-50 ;Â CM4371-50 ;Â CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
Popular Categories this Week
Headphones
Smartphones & Tablets
-
ALTIMETER
HTC AL-7010 Digital Distance M…
SPECIFICATIONS
- Altimeter : 500~9000 Meters
- Accuracy : 1 meter / feet
- Barometer : 300~1100 hPambar
- Accuracy : 1hPa / mbar (0.01HG)
- Indoor Temp. : -10~60oC
- Accuracy : 0.1oC (0.18oF)
- Humidity : 20~90% Rh
- Accuracy : 1% RH
- Stop Watch : 9hr 59min 59sec.
- Accuracy : 1/10th Sec. Or Sec.
FEATURES
- Altitude history & Graphical Display of the last 12 hour altitude readings.
- Total Altitude Gain & Loss
- Max./Min. Memory for Altimeter and Barometer Pressure
- Barometer Pressure History & Graphical Display
- Electronic barometer Weather Forecast (Sunny, Slightly Cloudy, Cloudy, Small Rain, Large Rain)
- Pressure Trend Indicators
- Perpetual Calendar with day of week
- 12/24 hour selectable
- Low Battery Indication
- Standard Accessories:Â Handy Belt, Manual, Charging Cord
- Dimension :Â 177(H) x 98(W) x 39(D)mm
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 901 ANALOG INSULATION …
SPCIFICTIONS :Â
- DC VOLTAGE : 100V
- AC VOLTAGE :
- TEMPERATURE : 0 Degree to 50 Degree C
- RANGE : 0-20MOhms
- ACCURACY : +- 5% of Indicated Value at 27 Degree C +- 5 Degree C
- DIMENSIONS : 144.5 x 95 x 72.5 mm (approx.)
- STORAGEÂ TEMPERATURE : -10 Degree C to 60 Degree C
FEATURES :Â
- Single Person Push Button Operation
- High Accuracy 5% of Indicated Value in Effective Range
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 903 ANALOG INSULATION …
SPECIFICATIONS :Â
- TESTÂ VOLTAGE : 500V
- LOADÂ CAPACITY : 3.5 KV @ 50Hz for 1 min. between Input Terminals & Case
- RANGE : 0-500M Ohms
- Display Type-LED
FEATURES :Â
- Model Name-Mc 903 M Ohms Analog Insulation Tester
- Brand Color-Yellow
- Primary Functions-Tester
- Type-Digital
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 904 ANALOG INSULATION …
SPECIFICATIONS :Â
- OPERATING TEMPERATURE : 0° to 50 °C
- INSULATIONÂ RESISTANCE TEST : More than 500 M Ohm at 500V between Circuit and Case
- DIMENSIONS : 144.5 x 95 x 72.5 mm(approx.)
- ACCURACY : High Accuracy ±5% of Indicated Value in Effective Range
FEATURES :Â
- Single Person Push Button Operation, Terminal voltage>85 % of rated voltage for insulation Resistance
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 906 ANALOG INSTRUMENT …
SPECIFICATIONS :Â
- RANGE : 1000V
- RESISTANCE : 0 – 200 M Ohms
- Power : 9V (6 x 1.5V AA) Battery
- DIMENSIONS : 144.5x95x72.5 mm (approx.)
FEATURES :Â
- Optimum performance
- Single Person Push Button Operation
- 3½ Digit 17mm LCD Display with Backlight
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 907 ANALOG INSULATION …
SPECIFICATIONS :Â
- DC VOLTAGE : 1000 V
- RANGE : 0-500MOhms
- POWER : 9V (6 x 1.5V AA) Battery
- ACCURACY : +- 5% of Indicated Value at 27 Degree C +- 5 Degree C
- DIMENSIONNS : 144.5 x 95 x 72.5 mm (approx.)
- STORAGE TEMPERATURE : -10 Degree C to 60 Degree C
FEATURES :Â
- Ingle Person Push Button Operation
High Accuracy 5% of Indicated Value in Effective Range.
SKU: n/a
