Product
Showing 31–45 of 105 results
-
BATTERY CAPACITY TESTER
HIOKI BATTERY TESTER BT3554-51
SPECIFICATIONS
- Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
- Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
- Testing source frequency : 1 kHz ±30 Hz
- Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
- Temperature measurement accuracy : -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
- Absolute max. input voltage : 60 V DC max. (No AC input)
- Measurement time : 100 ms
- Response time : Approx. 1.6 sec.
- Power supply : LR6 (AA) Alkaline dry battery ×8
- Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
- Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)
FEATURES
- Battery measurement can be performed while the battery is connected to its host device, without taking it offline
- Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
- Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
- Noise reduction technology improves noise resistance
- Screen and audio (*2) guidance simplifies measurement
- Measurement data is linked to site information and saved, reducing management man-hours
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- New protector delivers better ergonomic hold and durability in the field.
SKU: n/a -
EARTH RESISTANCE TESTER
HIOKI FT-6031-50 Earth Tester
SPECIFICATIONS
- Measurement System : Two-electrode method/three-electrode method (switchable)
- Measurement range / Accuracy :
20 Ω (0 Ω〜20.00 Ω) / ±1.5% rdg ±8 dgt
200 Ω (0 Ω〜200.0 Ω) / ±1.5% rdg ±4 dgt
2000 Ω (0 Ω〜2000 Ω) / ±1.5% rdg ±4 dgt - Earth voltage : 0〜30.0 V rms
Accuracy : ±2.3% rdg ±8 dgt (50 Hz/60 Hz), ±1.3% rdg ±4 dgt (DC) - Allowable earth potential : 25.0 V rms (DC or sine wave)
- Dustproof and waterproof : IP65/IP67 (EN60529)
- Dimensions : 185 mm (7.28 in)W × 111 mm (4.37 in)H × 44 mm (1.73 in)D
- Mass : 570 g (20.1 oz.) (including batteries and protector, excluding terminal covers and other accessories)
FEATURES
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- Excellent noise resistance
- IP67 protected – top of the industry
- Minimize cabling time with innovative earthing rods and cable winder
- Wide 0Ω to 2000Ω measurement range
- Test all ground types from Class A to Class D with a single meter
SKU: n/a -
DIGITAL INSULATION TESTER
HIOKI IR-3455 High Voltage Ins…
SPECIFICATIONS
- Test Voltage : 250 V to 5.00 kV DC, (Possible in 25 V steps between 250 V and 1 kV and in 100 V steps between 1 and 5 kV)
- Measurement Range :
0.00 MΩ to 500 GΩ (250 V)
0.00 MΩ to 1.00 TΩ (500 V)
0.00 MΩ to 2.00 TΩ (1 kV)
0.00 MΩ to 5.00 TΩ (2.5 kV)
0.00 MΩ to 10.0 TΩ (5 kV) - Measurement Current : 1 mA (Test voltage 250 V to 1.00 kV), 0.5 mA (Test voltage 1.10 kV to 2.50 kV) 0.25 mA (Test voltage 2.60 kV to 5.00 kV), Short-circuit current: 2 mA or less
- Resistance Range : 10 MΩ to 10 TΩ, 7 ranges (auto range)
- Accuracy :
±5% rdg. ±5 dgt. Up to [Test voltage (setting value)/Resistance measurable at 100 nA]
±20% rdg. ±5 dgt. [Test voltage (setting value)/Resistance measurable at 100 nA] to [Test voltage (setting value)/Resistance measurable at 1 nA] or 500 GΩ
±30% rdg. ±50 dgt. [Test voltage (setting value)/Resistance measurable at 1 nA] or 501 GΩ to 9.99 TΩ - Leakage current measurement : 1.00 nA to 1.20 mA, 6 ranges (current measurement that occurs when test voltage is generated)
Accuracy ±2.5% rdg. ±5 dgt. (1 mA range); refer to complete catalog for other ranges - Voltage measurement : ±50 V to ±1.00 kV DC, 50 V to 750 V AC (50/60 Hz),
Accuracy: ±5 % rdg. ±5 dgt. , Input resistance: Approx. 10 MΩ - Temperature measurement : -10.0 ˚C to 70.0 ˚C, 3 ranges (used with optional sensor)
Accuracy ±1.0 ˚C (0.0 ˚C to 40.0 ˚C); refer to complete catalog for other ranges - Other Functions : Insulation Diagnosis (Temperature compensation, PI/DAR display, Step voltage test), Data memory, Communication (USB 2.0, PC application software), auto discharge, hot conductor warning indication, etc.
- Digital LCD, max. 999 dgt. with backlight, Bar graph display
- Dimensions and Mass : 260 mm (10.24 in)W × 250.6 mm (9.87 in)H × 119.5 mm (4.70 in)D, 2.8 kg (98.8 oz)
- Included Accessories : Test lead 9750-01 ×1, Test lead 9750-02 ×1, Test lead 9750-03 ×1, Alligator clip 9751-01 ×1, Alligator clip 9751-02 ×1, Alligator clip 9751-03 ×1, Instruction manual ×1, LR6 (AA) alkaline batteries ×6, USB cable ×1, PC application software (CD-R) ×1
FEATURES
- Measure insulation of high-voltage equipment (such as transformers, cables, and motors)
- Wide testing voltage range, up to 5.00 kV from 250 V DC
- Wide measurement insulation range, up to 10 TΩ
- PI (Polarization Index) and DAR (Dielectric Absorption Ratio) automatically calculated / display
- Extended operating temperature range of -10°C to 50°C
- Data memory function to reduce handwritten notes
- Bright LED luminous scale
SKU: n/a -
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
- Maximum Input Voltage : DC 2000 V
- Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V - Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
- Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L) - Output Terminal : 4 mm banana terminal
- Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
- Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing) - Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
- Standards : EN 61010
- Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
- Enables high voltage measurement up to CAT Ⅲ 2000 V
- Safely measure solar installations like the mega-solar without interrupting the grid
- Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
- DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V - CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V - DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10) - DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10) - DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a -
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a -
DIGITAL INSULATION TESTER
HTC 6250IN Digital Insulation …
SPECIFICATIONS
- Testing Voltage : 1000/2500/5000V
- OUT VOLTAGE : 90~110% of the test voltage
- RANGE : 0.1MΩ~200GΩ
- RESOLUTION : 0.01MΩ
- ACCURACY : 0.1~200MΩ ± 3% of rdg + 5digits ; 200MΩ~10GΩ ± 5% of rdg + 5 digits ; 10~200GΩ ± 10% of rdg + 5 digits
AC VOLTAGE
-
- RANGE : 0 – 600V
- RESOLUTION : 1V
- ACCURACY : ±2.0% of rdg + 5 digits
FEATURES
- 3½ Digit Insulation Tester with Backlight
- 1,999 Count
- Data Hold
- Auto Ranging
- 3 in 1 Insulation Resistance Phase Testing / Voltage Testing & Adaptor
- POWER: AA 1.5V X 8
- Standard Accessories : Hard Carrying Case, Test Lead, Manual, Power Adaptor
- Dimension : 190(H) x 155(W) x 75(D)m
SKU: n/a -
DIGITAL INSULATION TESTER
HTC 6350 IN Insulation Resista…
SPECIFICATIONS
- Testing Voltage : 100/250/500/1000/2500/5000 V
- OUT VOLTAGE : 90~110% of the test voltage
- RANGE : 0.1M 20G for 100/250/500 V ; 0.1M 200G for 1000/2500/5000 V
- RESOLUTION : 0.01MΩ
- ACCURACY : 0.1~200MΩ ± 3% of rdg + 5digits ; 200MΩ~10GΩ ± 5% of rdg + 10 digits ; 10~200GΩ ± 10% of rdg + 5 digits
AC VOLTAGE
-
- RANGE : 0 – 600V
- RESOLUTION : 1V
- ACCURACY : ±2.0% of rdg + 5 digits
FEATURES
- 3½ Digit Insulation Tester with Backlight
- 1,999 Count
- Data Hold
- Test Range 100 V to 5000 V
- POWER: AA 1.5V X 8 (Rechargeable Battery)
- Standard Accessories : Soft Carrying Case, Test Lead, Manual, Power Adaptor,AA 1.5V X 8 (Rechargeable Battery)
- Dimension : 190(H) x 155(W) x 75(D)mm
SKU: n/a -
DETECTOR
HTC AC IV Pen Type AC Voltage …
SPECIFICATIONS
- VOLTAGE RANGE : High 12 ~ 1000V / Low 48 ~ 1000V
- IP- Protection : IP-40
- Overvoltage Category : CAT III, 1000V
FEATURES
- Display LCD with Bargraph
- Backlight Red & Green Double Colour
- Signal Intensity four level
- Flash Light No operation sensing signal will shutdown
- Auto Power Off (APO 3 minutes)
- POWER: AAA 1.5V X 2
- Dimension : 157(H) x 27W) x 23(D)mm
- Weight : Approx 32 g
SKU: n/a -
DETECTOR
HTC AC-II AC Meter
SPECIFICATIONS
- VOLTAGE RANGE : 90~1000 VAC
- IP- Protection : IP-40
- Overvoltage Category : CAT IV, 1000V
FEATURES
- Display LED (flashing) acoustic Sound Signal
- Auto Power Off (APO 5 minutes)
- Bright White LED Flash Light
- POWER : AAA 1.5V X 2
- Dimension : 145(H) x 25(W) x 21(D)mm
- Weight : Approx 42g
SKU: n/a -
DETECTOR
HTC AC-VI Voltage Detector Wit…
SPECIFICATIONS
- AC Voltage : 12~1000V， 50/60Hz
- Operating Temperature : 0 ~ 40º
- Storage Temperature : 10º ~ 50º
- Humidity : ≤95%
- Altitude : ≤2000m
- IP Protection : IP66
- Battery : 2×1.5V AAA
FEATURES
- Display LCD with Bargraph
- Auto Power Off (APO 5 minutes)
- Flash Light no operation sensing signal will shutdown
- Signal Intensity Four Level
SKU: n/a -
ALTIMETER
HTC AL-7010 Digital Distance M…
SPECIFICATIONS
- Altimeter : 500~9000 Meters
- Accuracy : 1 meter / feet
- Barometer : 300~1100 hPambar
- Accuracy : 1hPa / mbar (0.01HG)
- Indoor Temp. : -10~60oC
- Accuracy : 0.1oC (0.18oF)
- Humidity : 20~90% Rh
- Accuracy : 1% RH
- Stop Watch : 9hr 59min 59sec.
- Accuracy : 1/10th Sec. Or Sec.
FEATURES
- Altitude history & Graphical Display of the last 12 hour altitude readings.
- Total Altitude Gain & Loss
- Max./Min. Memory for Altimeter and Barometer Pressure
- Barometer Pressure History & Graphical Display
- Electronic barometer Weather Forecast (Sunny, Slightly Cloudy, Cloudy, Small Rain, Large Rain)
- Pressure Trend Indicators
- Perpetual Calendar with day of week
- 12/24 hour selectable
- Low Battery Indication
- Standard Accessories: Handy Belt, Manual, Charging Cord
- Dimension : 177(H) x 98(W) x 39(D)mm
SKU: n/a -
ANEMOMETER
HTC AVM-06 Anemometer
SPECIFICATIONS
- Air Velocity Range: 0.80 – 30.00 M/S.
- Air Velocity Resolution: 0.01 M/S.
- Air Velocity Accuracy: (2.0% + 50).
- Operating Environment: -10C – 60C
FEATURES
- Used for ambient temperature, humidity, dew point temperature, wind speed & air volume
- Data Hold
- Auto Power Off (APO)
- USB Real Time data uploading functions
- Backlight LCD
- POWER : AAA 1.5V X 3
- Standard Accessories : Soft Carrying Case, Manual, USB Cable & Software
- Dimension : 165(H) X 85(W) X 38(D)mm
SKU: n/a -
ANEMOMETER
HTC AVM-07 Anemometer
SPECIFICATIONS
- Air Velocity Range: 0.40 – 450 M/S.
- Air Velocity Resolution: 0.1M/S.
- Air Velocity Accuracy: (2% +0.1M/S).
FEATURES
- 0.5” (13mm) 4Digit Display
- Data Hold
- Data Memory : 24 groups
- Auto Power Off (APO)
- Optional RS-232 Communication (Advanced Software Program for all windows)
- Backlight LCD
- Power : AAA 1.5v x 4
- Standard Accessories : Sensor Probe, Hard Carrying Case, Manual
- Optical Accessories : HTC Software with RS-232 USB Cable
- Dimension : 156(H) x 67(W) x 28(D)mm Sensor Head -72mm Dia
SKU: n/a -
ANEMOMETER
HTC AVM-08 Hot Wire Anemometer
SPECIFICATIONS
- Air Velocity Range: 0.10 – 25.0 M/S.
- Air Velocity Resolution:0.01 M/S.
- Air Velocity Accuracy: (5% +0.1M/S).
FEATURES
- °C/°F Function
- Super Large LCD display with baclight
- Reading the Air Velocity & Temperature same time
- Thermistor sensor for Temperature measurement, Fast Response time.
- Power : 9V (6F22) x1
- Standard Accessories : Anemo Probe, Carrying Case, Manual, Power Adaptor
- Dimension : 210(H) X 75(W) X 50(D)mm
SKU: n/a -
BATTERY CAPACITY TESTER
HTC BM-36 BATTERY TESTER
SPECIFICATIONS
- Screen : 2.4″ Colour Screen
- Application : 12V/24V Battery/ Electric Vehicle
- Battery Lifespan : Show as Percentage
- Voltage/CCA/Internal resistance : Yes
- Start the test : Yes
- Load Test : Yes
- Charging test : Yes
- Kelvin Probe test : Yes
- Colour Screen operating system : Yes
- Protection input for anti-polarity/Overvoltage : Yes
- Built in Li-ion Battery : Yes
FEATURES
- 2.4” Inches Colour Screen
- Test the Performance of 12V/24V Lead-Acid Battery
- Battery Test Only Measure the Battery Life
SKU: n/a
