Product
Showing 16–30 of 105 results
-
BREATH ALCOHOL ANALYSER
Beetech BAT-6300 (Previously C…
SPECIFICATIONS
- Detection range :
0.000 – 0.199 BAC %
0.000 – 0.995 mg/L
0.00 – 1.990 BAC ‰ - Alarming Level :
0.05 BAC %
0.5 BAC ‰
0.25 mg/L - Accuracy :
± 0.01% BAC
± 0.1‰ BAC
± 0.05 mg/L - Response time : < 5s
- Warm-up time : < 20s
- Working current : ≤ 120mA
- Operating environment : -10˚C ~ 50˚C
- Power supply : 4.5V (3xAAA) battery
FEATURES
- Display Mode: 3 – digit LCD display with blue backlit
- Built-in mouth piece which can be replaced
- Light weight stylish design and a patented product.
- Audio warning beyond pre-set limit
- ‰ – bit digital alcohol tester
- Three kinds of unit conversion (%BAC, ‰BAC, mg/L)
- Both sides of the product can be installed with a mouthpiece.
- Auto power off after 20s
SKU: n/a - Detection range :
-
CAPACITANCE METER
BEETECH BCM-15C 3 1/2 DIGITAL …
SPECIFICATIONS
- Range : 20mF
- Accuracy : ± (2%+ 2d)
- Resolution : 10uF
- Testing frequency : 8Hz
FEATURES
- Display Mode: 3 1/2 LCD display
- Maximum Display: 1999
- Sampling rate: 2 – 3times/s
- Low battery indication:
- Auto Power Off
- It is applied with CMOS double – bevel A/D convertor that is automatic in
zeroing and polar selection. - Wide measuring range
- Zeroing function
- Data hold
- Power supply: 9V battery
- Dimensions: 186(L) x 86(W) x 41mm(H)
- Weight: ≈ 270g (battery included)
- Operating environment: 0˚C ~ 40˚C,
at <80% RH - Storage environment: -10˚C ~ 50˚C,
at <80% RH - Accuracies are guaranteed for 1 year, 25 ˚C ± 5 ˚C , less than 85% R
SKU: n/a -
FUNCTION GENERATOR
BEETECH FG-1601 FUNCTION GENER…
- Waveform : Sine, square, triangle and TTL with symmetry
- Amplitude : 0 to 0.2V, 2V, 20V Vpp
- Sine distortion : < 1%
- Frequency range : 1Hz to 1MHz with digital frequency counter
- Frequency accuracy : ± 5% of full scale
- Output impedance : 50 Ω ± 10%
- DC offset : ± 10V
- Power : 230V ± 10%, 10VA
- Dimensions : 240 (L) x 200 (W) x 85mm (H)
- Weight : ≈ 3Kg
FEATURES
- Sine wave, triangular wave, square wave and TTL wave outputs.
- Low distortion
- Minimal sag at frequencies as low as 1Hz
- Offset control to shift baseline
SKU: n/a -
LCR METER
BEETECH H-530 3 1/2 DIGITS LCR…
SPECIFICATIONS
Capacitance
- Range : 2000uF
- Accuracy : ± (5%+5)
- Resolution : 1uF
Inductance
- Range : 20H
- Accuracy : ± (0.5%+ 1)
- Resolution : 10mH
Resistance
- Range : 20M
- Accuracy : ± (0.5%+ 1d)
- Resolution : 1nF
FEATURES
- Display Mode: 3 1/2 LCD display
- Maximum Display: 1999
- Sampling rate: 3 times/s
- Low battery indication & Data Hold
- Auto Power Off
- 9 Volt Battery
SKU: n/a -
DETECTOR
BOSCH DETECTOR DTECT 200C
TECHNICAL DETAILS
- Dust and splash protection : IP 5X
- Bosch Radar Technology : Yes
- Max. detection depth : 200mm
- Detectable objects : magnetic metals (e.g. iron), non-magnetic metals (e.g. copper), live cables, low-voltage & data cables (Three-phase power cables, cavities), non-live cables, wooden substructures, water-filled plastic pipes, Empty plastic pipes
- Detection depth, dry concrete, max. : 200mm
- Detection depth, early age concrete, max. : 60mm
- Detection depth, other wall types, max. : 80mm
- Detection depth, magnetic metal, max. : 200mm
- Detection depth, non-magnetic metal, max. : 80mm
- Detection depth, live cables, max. : 80mm
- Detection depth, wooden substructures, max. : 38mm
- Accuracy : ±5 mm
- Views : Object view, Spot view, Signal View, Signal View 2D
- Wall types : Concrete, Early age concrete, Drywall, Brick/Universal, Horizontal coring brick, Vertical coring brick, Panel Heating
- Documentation via : USB-C, SD-Card
- Updatable : Yes
- Material identification : Magnetic metal, Non-magnetic metal, Non-metal material, Live cable
- Power supply : 12 V Li-Ion battery, 10.8 V-LI ION battery, 4 x 1.5 V LR6 (AA)
- Weight : 0.64 kg
- Additional function : Leakage detection, distance measurement
SKU: n/a -
LINE LASER
BOSCH GLL 5-50X LINE LASER
TECHNICAL DATA
- Working range with receiver, value : 50m
- Working range : 15m
- Working range with receiver : 50m
- Accuracy : Horizontal laser line: ± 0.2 mm/m* ; Vertical laser lines: ± 0.3 mm/m* (*plus use-dependent deviation)
- Working range, value : 15m
- Laser diode : 630 – 650 nm, < 1mW
- Operating temperature : -10 – 45 °C
- Storage temperature : -20 – 70 °C
- Laser class : 2
- Working range of laser points, max. : 5m
- Self-levelling range : ± 3°
- Levelling time : 4s
- Power supply : 4 x 1.5 V LR6 (AA)
- Operating time (max.) : 24h
- Tripod thread : 5/8″
- Weight, approx. : 0.5kg
- Colour of laser line/plumb points : Red
- Plumb point accuracy : ± 0.7 mm/m* (*plus use-dependent deviation)
SKU: n/a -
DISTANCE METER
BOSCH GLM 100-25C Laser Measur…
TECHNICAL DETAILS
- Measuring range, up to : 100 m
- Dust and splash protection : IP 54
- Measurement time, typical : < 0.5 s
- Units of measurement : m/cm, ft/inch
- Laser diode : 650 nm, < 1 mW
- Measurement range : 0.08 – 100.00 m
- Laser class : 2
- Measurement accuracy, typical : ± 1.5 mmᵈ
- Measurement range of incline measurement : 0 – 360° (4 x 90°)
- Measuring accuracy (typical) : ± 0.2°* (*plus use-dependent deviation)
- Measurement time, max. : 4 s
- Power supply : 3 x 1.5 V LR6 (AA)
- Automatic deactivation : 5 min
- Weight, approx. : 0.23 kg
- Memory capacity (values) : 50
- Tripod thread : 1/4″
- Digital viewfinder : integrated
- Data transfer : Bluetooth™ 4.2 Low Energy
- Laser color : Red
SKU: n/a -
DISTANCE METER
BOSCH GLM 30-23 Laser Measure
- Laser Diode : 635 nm, < 1 mW
- Measurement range : 0.15 – 30.00 m
- Weight, approx. : 0.09 kg
- Measurement time, typical : 0.5 s
- Units of measurement : m/cm
- Laser class : 2
- Measurement accuracy, typical : ± 1.5 mmᵈ
- Measurement time, max. : 4.2 s
- Power supply : 2 x 1.5 V LR03 (AAA)
- Automatic deactivation : 5 min
- Laser colour : Red
- Measuring range, up to : 30m
SKU: n/a -
EARTH RESISTANCE TESTER
CIE DET-2000 Digital Earth Tes…
PECIFICATIONS
- Display : 3.5 digits,L.C.D
- Accuracy :
0% to 10% of the range…….+3%
10% to 90% of the range……+1.5%
90% to 100% of the range……+3% - H.V Test : 2KV AC For 1 min. Between electrical circuit and containing case
- Insulation Resistance Test : More than 25M Ohm at 500V dc between electrical circuit
FEATURES
- Rugged ABS Body
- 0-10 — 1000 Ohm
- Easy to use hand held meter
- Ni-cd rechargeable cells
- Facility as to make bench top type instrument
- Four terminals
- Designed to measure the resistance of earth used in power circuit
SKU: n/a -
DIGITAL INSULATION TESTER
Fluke 1503 Insulation Resistan…
SPECIFICATIONS
- AC/DC Voltage Measurement
Range : 600.0 V
Resolution : 0.1V
Accuracy : 50 Hz to 400 Hz ±(% of Rdg + Digits) ±(2% + 3) - Earth Bond Resistance Measurement
Range : 20.00 Ω to 20.00 kΩ
Resolution : 0.01 Ω to 0.01 kΩ
Accuracy : ±(1.5% + 3) - Insulation Specifications
Range : 0.01 MΩ to 2000 MΩ
Test Voltage : 500 V, 1000 V
Test Voltage Accuracy : + 20%, – 0% - Storage temperature : -40°C to 60°C (-40°F to 140°F)
- Operating temperature : -20°C to 55°C (-4°F to 131°F)
- Vibration : Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
- Safety : Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
- Certifications : CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
- Size : 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
- Weight : 550g
- IP Rating : IP40
FEATURES
- A rugged, compact insulation resistance tester for residential and commercial electricians
- Performs insulation tests from 0.01 MΩ to 2000 MΩ
- Offers two insulation test voltages: 500 V and 1000 V
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Measures resistance from 0.01 Ω to 20.00 kΩ
SKU: n/a - AC/DC Voltage Measurement
-
ANEMOMETER
FLUKE 925 VANE ANEMOMETER
SPECIFICATIONS
- Wind Speed Measurement
m/s : 0.40 to 25.00 m/s
ft/m : 80 to 4900 ft/m - Air Flow Measurement
Cubic meter/ second : 0.01 to 99.99 m3/s
Cubic foot/minute : 1 to 9999 ft3/m - Wind Temperature Measurement
Wind Temperature : 0°C to 50°C - Display : Dual-screen 4-digit (9999 points) LCD screen
- Measurement Unit
Wind speed: ft/m; m/s
Air flow: CMS (m3/s) and CFM (ft3/m) (cubic foot/minute)
Wind temperature: °C and °F - Data Holding : Lock the displayed readings
- Sensor
Wind speed/air flow sensor: conventional angular vane arm, lubricating ball bearing
Wind temperature sensor: precision thermistor
Minimum/maximum value storage, recording and viewing the minimum reading and maximum reading - Auto Power Off : Enter the sleep mode after 20 minutes (can be disabled) to save power
- Battery Life : 100 Hours
- Weight : 363 g, including the battery and sensor
- Dimensions: 181 × 71 × 38 mm
- Sensor head diameter : 70 mm
FEATURES
- Ability to measure wind speed in feet per minute or meters per second
- Data capture using one button and the ability to average multiple readings
- Min and Max alarm setting to alert the user when limits have been met
- Durable over mold housing to protect the unit from drops
- 1 M extension of sensor from display to ensure air flow is captured in hard to reach location
SKU: n/a - Wind Speed Measurement
-
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
- Extractable Cloth Junction to Extend pH Electrode Life
- Has Automatic Temperature Compensation
- For Use in Fresh Water
SKU: n/a