BATTERY CAPACITY TESTER

SPECIFICATIONS

• Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
• Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
• Testing source frequency : 1 kHz ±30 Hz
• Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
• Temperature measurement accuracy :  -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
• Absolute max. input voltage : 60 V DC max. (No AC input)
• Measurement time : 100 ms
• Response time : Approx. 1.6 sec.
• Power supply : LR6 (AA) Alkaline dry battery ×8
• Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
• Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)

FEATURES

• Battery measurement can be performed while the battery is connected to its host device, without taking it offline
• Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
• Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
• Noise reduction technology improves noise resistance
• Screen and audio (*2) guidance simplifies measurement
• Measurement data is linked to site information and saved, reducing management man-hours
• Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
• New protector delivers better ergonomic hold and durability in the field.

SPECIFICATIONS : 

• BATTERY VOLTAGE : 6 & 12 V DC
• DIMENSIONS : 205x115x70 mm
• CERTIFICATIONS : CAT III 600V
• RESISTANCE : Internal Battery Load Test & 4 – Wires Test: 0-99 mV
• BATTERY CAPACITY : 40-200 Ah

FEATURES : 

• Auto Data Hold.
• Overload Protection.
• Missing Lead Detection.
• Detects & Display Bad Cell.
• Reverse Polarity Protection.
• Built-In 10 Seconds Timer to Auto Cut-off Load After Test.

SPECIFICATIONS : 

• RATED  CAPACITY : 4 – 400 Ah
• DIMENSION : 235x90x50 mm

FEATURES : 

• Key Parameters Measured for Diagnosis of Vehicle Battery & Electrical System
• Display of Battery Condition [Good / Ok / Pay Attention / Replace]
• Overload Protection to ensure Operator Safety
• Loose Lead DetectionReverse Polarity Protectionl
• Internal Unit Conversion CCA / IEC / EN / DIN
• Battery Recharge Indicator, Detects and Displays Bad Cell, Overload Protection of Input Voltage